MVRV - Market Value To Realized Value

Definition

MVRV (Market Value to Realized Value) ratio is an asset’s market capitalization divided by realized capitalization, where realized capitalization is every token multiplied by its acquisition price.

MVRV Ratio Overview

MVRV shows the ratio between the current price and the average price of every token acquired. An increase in the ratio shows us how much unrealized profit the market is sitting on. As the ratio increases, more market participants become willing sellers. The value of MVRV gives an idea about the average profit of holders across different durations.

How MVRV Is Measured

The MVRV Ratio is used as an on-chain indicator for the purpose of studying aggregate investor behaviors as price moves to/from their cost basis. It can be considered as a mean reversion style model, where the Realized Cap (aggregate market cost basis) functions as the mean and MVRV measures deviations from this mean.

The value of a given asset’s MVRV gives an idea of how overvalued or undervalued an asset is based on short-, mid-, or long-term timeframes.

An MVRV value of 100% (or 2.0) means that if all holders sell their coins/tokens at the current price, they will generate a 100% (x2) profit on average. The more this ratio increases, the more likely traders have historically demonstrated their willingness to sell.

On the other side of the spectrum, a negative MVRV value indicates that the asset is “undervalued” on average. This means that if all coins were sold, most traders would be realizing losses at the asset’s current price.

MVRV values (regardless of which timeframe) will hover around 0%, assuming the asset has had enough time to normalize after its introduction as a publicly-traded asset.

Overall, MVRV shows the average profit/loss of all the coins currently in circulation given the current price.

We need to define two terms:

  • MV as in Market Value refers to the well-known capitalization. The second part is the
  • RV as in Realized Value. It is an alternative to the Market Value where instead of the current price, every coin/token is multiplied by its acquisition price.

The definition of MVRV is:

MVRV=MVRVMVRV = \frac{MV}{RV}

Usage Guide

The MVRV ratio allows traders to gauge both actual profitability vs. loss on the network, as well as gauge the inherent degree of fear and greed that comes with it. Assets have different extremes in terms of how far a positive or negative fluctuation in its MVRV can go. And if we measure the coin’s current MVRV vs. its lowest and highest points, it’s usually fair to make educated presumptions of when price tops and bottoms are forming.

MVRV Bitcoin Chart

High MVRV Values ( > 2 )

MVRV value of 2 means that if all holders sell their coins/tokens at the current price, they will generate an x2 profit on average.

Low MVRV Values ( < 1 )

If the MVRV value is between 0 and 1, then the market is “undervalued” on average, meaning most people will realize losses if they all sell their holdings at the current price.

Where Do Specific Thresholds (like ±15%) Come From?

You may see MVRV-based warning thresholds referenced elsewhere, such as a ±15% divergence on the 30-day MVRV for a given asset. These are not fixed values derived from the MVRV formula itself. They are rule-of-thumb levels based on backtests Santiment standardized across many assets, meant to flag when an asset is entering an “opportunity” or “danger” zone relative to its own history.

Because assets differ significantly in volatility, a single threshold does not transfer cleanly between them. Bitcoin is comparatively low-volatility, so a 15% average move already stands out. A small, newly listed, high-volatility token might only become notable around ±50%.

Treat any such threshold as a probability strengthener rather than a hard rule: the closer the ratio gets to a historical extreme for that asset, the more likely a reversal becomes, but the rule can and does break.

Additional Resources

Timebound

Timebound Metrics available.

The timebound metrics can help exclude the inactive addresses. These metrics are computed the same way as the MVRV metric, with the only difference that they take into account only the coins/tokens that have moved in the desired time range. Examples: mvrv_usd_365d is computed on the coins/tokens that moved at least once in the past 365 days. mvrv_usd_60d is computed by taking only the coins/tokens that moved at least once in the past 60 days.

Comparing timebound MVRV values of different time ranges can clarify how much profit/loss long-term and short-term holders can realize.


Change Metrics

Change Metrics


MVRV Long/Short Difference

MVRV Long/Short Difference is defined as:

mvrv_usd_365d−mvrv_usd_60d\text{mvrv\_usd\_365d} - \text{mvrv\_usd\_60d}

Negative values mean that short-term holders will realize higher profits than long-term holders if they sell at a price at this moment. Positive values show the opposite.

During strong and long bull runs, this metric tends to grow, and during bear markets it decreases. The rationale is that during strong bull runs, the long-term holders determine when the bull run will end when they start selling, while during bear markets, the long-term holders are at a loss on average and the short-term holders manage to realize profits.


Access

Restricted Access


Measuring Unit

Ratio

The API returns this ratio directly, not a percentage. A value of 1.15 means the average holder is sitting on a 15% unrealized profit, and a value of 0.85 means a 15% unrealized loss. This matches the “100% (or 2.0)” example above: a ratio of 2.0 is a 100% profit.


Data Type

Timeseries Data


Frequency

All available assets have Daily Intervals. A subset of the available assets that consists of some of the bigger assets has Five-Minute Intervals.


Latency

On-Chain Latency


Metric Version

As of this writing, MVRV metrics have a single version, 1.0 (original:v1), confirmed live via availableVersions. See Metric Versions for how versioning works generally across the API.

{
getMetric(metric: "mvrv_usd_30d") {
metadata {
availableVersions {
version
versionName
}
}
}
}

Revisions

A daily MVRV value can still change for about 48 hours after the day closes, while late-arriving data is incorporated. This is its stabilization period. Beyond that window, there is no scheduled revision cycle, and the routine pipeline does not revise the value further.

Historical values can still change outside that window if Santiment deliberately reruns the full computation, for example after fixing a bug in the price, market cap, or on-chain supply data that MVRV depends on. Such a rerun can affect the full history of the metric, not just recent values.

MVRV is not currently part of the onlyFinalizedData scope, which is limited to Bitcoin Cash and a small set of other metrics as of this writing.

Santiment does not retain point-in-time snapshots of MVRV metrics as they were originally published. The API always returns the latest revised value for a given timestamp; there is no way to retrieve a prior, unrevised value. Point-in-Time (PIT) metrics exist for social metrics such as Social Volume and Sentiment, but not for on-chain metrics like MVRV.


Available Assets

The daily interval MVRV metrics are available for these assets

The 5-minute MVRV metrics are available for these assets

The earliest reliable date varies by asset; for example, the earliest available mvrv_usd_30d data point for Ethereum is 2015-08-07, and values normalize after 2015-08-29 as the realized cap accumulates enough history. Use availableSince to check the earliest data point for any asset:

{
getMetric(metric: "mvrv_usd_30d") {
availableSince(slug: "ethereum")
}
}

SanAPI

The daily metrics are available under the mvrv_usd name and under the mvrv_usd_<interval> name for the timebound metrics. The 5-minute interval metrics are available under the mvrv_usd_intraday name and under the mvrv_usd_intraday_<interval> name for the timebound metrics.

Example of query for mvrv_usd:

{
getMetric(metric: "mvrv_usd") {
timeseriesDataJson(
slug: "santiment"
from: "2019-01-01T00:00:00Z"
to: "2019-09-01T00:00:00Z"
interval: "7d"
)
}
}

Example of query for mvrv_usd_intraday:

{
getMetric(metric: "mvrv_usd_intraday") {
timeseriesDataJson(
slug: "bitcoin"
from: "utc_now-90d"
to: "utc_now-30d"
interval: "3d"
)
}
}

Example of query for timebound MVRV:

{
getMetric(metric: "mvrv_usd_7d") {
timeseriesDataJson(
slug: "santiment"
from: "2019-01-01T00:00:00Z"
to: "2019-09-01T00:00:00Z"
interval: "7d"
)
}
}

Example of query for MVRV Long/Short Difference

{
getMetric(metric: "mvrv_long_short_diff_usd") {
timeseriesDataJson(
slug: "santiment"
from: "2019-01-01T00:00:00Z"
to: "2019-09-01T00:00:00Z"
interval: "7d"
)
}
}

Full List of Metrics

The full list of MVRV metrics is:

Open Metrics List
  • mvrv_long_short_diff_usd
  • mvrv_usd
  • mvrv_usd_10y
  • mvrv_usd_180d
  • mvrv_usd_180d_change_1d
  • mvrv_usd_180d_change_30d
  • mvrv_usd_180d_change_7d
  • mvrv_usd_1d
  • mvrv_usd_2y
  • mvrv_usd_30d
  • mvrv_usd_30d_change_1d
  • mvrv_usd_30d_change_30d
  • mvrv_usd_30d_change_7d
  • mvrv_usd_365d
  • mvrv_usd_365d_change_1d
  • mvrv_usd_365d_change_30d
  • mvrv_usd_365d_change_7d
  • mvrv_usd_3y
  • mvrv_usd_5y
  • mvrv_usd_60d
  • mvrv_usd_60d_change_1d
  • mvrv_usd_60d_change_30d
  • mvrv_usd_60d_change_7d
  • mvrv_usd_7d
  • mvrv_usd_7d_change_1d
  • mvrv_usd_7d_change_30d
  • mvrv_usd_7d_change_7d
  • mvrv_usd_90d
  • mvrv_usd_90d_change_1d
  • mvrv_usd_90d_change_30d
  • mvrv_usd_90d_change_7d
  • mvrv_usd_change_1d
  • mvrv_usd_change_30d
  • mvrv_usd_change_7d
  • mvrv_usd_intraday
  • mvrv_usd_intraday_10y
  • mvrv_usd_intraday_180d
  • mvrv_usd_intraday_1d
  • mvrv_usd_intraday_2y
  • mvrv_usd_intraday_30d
  • mvrv_usd_intraday_365d
  • mvrv_usd_intraday_3y
  • mvrv_usd_intraday_5y
  • mvrv_usd_intraday_60d
  • mvrv_usd_intraday_7d
  • mvrv_usd_intraday_90d
  • mvrv_usd_z_score